Saxon XSLT and XQuery Processor - saxon -- ECCN Request

classic Classic list List threaded Threaded
7 messages Options
Reply | Threaded
Open this post in threaded view
|

Saxon XSLT and XQuery Processor - saxon -- ECCN Request

Joice Joy
Hi,

I am trying to compile the Export Control Classification Number (ECCN)
for the third-party software ( whose Origin country is US )being used

with one of our products.

This is to facilitate the export of the product outside US.

Could you help us in identifying whether the Subject line software
currently has an ECCN number and the country of origin.
Also could you help in identifying whether it contains any encryption
module that
causes it to use an ECCN number for export.

If this is not the right contact, please forward this mail to the
correct person.


Thanks and Regards,
Joice Joy
Company - Comverse

------------------------------------------------------------------------------
_______________________________________________
saxon-help mailing list archived at http://saxon.markmail.org/
[hidden email]
https://lists.sourceforge.net/lists/listinfo/saxon-help 
Reply | Threaded
Open this post in threaded view
|

Re: Saxon XSLT and XQuery Processor - saxon -- ECCN Request

Michael Kay
I suggest using EAR99, meaning (essentially) “unclassified”.

Please note that this information is given without the benefit of any specialist understanding of US legislation or regulations, so we reserve the right to be wrong.

Michael Kay
Saxonica


> On 3 Jun 2015, at 08:14, Joice Joy <[hidden email]> wrote:
>
> Hi,
>
> I am trying to compile the Export Control Classification Number (ECCN)
> for the third-party software ( whose Origin country is US )being used
>
> with one of our products.
>
> This is to facilitate the export of the product outside US.
>
> Could you help us in identifying whether the Subject line software
> currently has an ECCN number and the country of origin.
> Also could you help in identifying whether it contains any encryption
> module that
> causes it to use an ECCN number for export.
>
> If this is not the right contact, please forward this mail to the
> correct person.
>
>
> Thanks and Regards,
> Joice Joy
> Company - Comverse
>
> ------------------------------------------------------------------------------
> _______________________________________________
> saxon-help mailing list archived at http://saxon.markmail.org/
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/saxon-help 


------------------------------------------------------------------------------
_______________________________________________
saxon-help mailing list archived at http://saxon.markmail.org/
[hidden email]
https://lists.sourceforge.net/lists/listinfo/saxon-help 
Reply | Threaded
Open this post in threaded view
|

Re: Saxon XSLT and XQuery Processor - saxon -- ECCN Request

Joice Joy
Could you also share the country of origin of the code.

Thanks and Regards,
Joice Joy

On Wed, Jun 3, 2015 at 12:59 PM, Michael Kay <[hidden email]> wrote:

> I suggest using EAR99, meaning (essentially) “unclassified”.
>
> Please note that this information is given without the benefit of any specialist understanding of US legislation or regulations, so we reserve the right to be wrong.
>
> Michael Kay
> Saxonica
>
>
>> On 3 Jun 2015, at 08:14, Joice Joy <[hidden email]> wrote:
>>
>> Hi,
>>
>> I am trying to compile the Export Control Classification Number (ECCN)
>> for the third-party software ( whose Origin country is US )being used
>>
>> with one of our products.
>>
>> This is to facilitate the export of the product outside US.
>>
>> Could you help us in identifying whether the Subject line software
>> currently has an ECCN number and the country of origin.
>> Also could you help in identifying whether it contains any encryption
>> module that
>> causes it to use an ECCN number for export.
>>
>> If this is not the right contact, please forward this mail to the
>> correct person.
>>
>>
>> Thanks and Regards,
>> Joice Joy
>> Company - Comverse
>>
>> ------------------------------------------------------------------------------
>> _______________________________________________
>> saxon-help mailing list archived at http://saxon.markmail.org/
>> [hidden email]
>> https://lists.sourceforge.net/lists/listinfo/saxon-help
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> saxon-help mailing list archived at http://saxon.markmail.org/
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/saxon-help

------------------------------------------------------------------------------
_______________________________________________
saxon-help mailing list archived at http://saxon.markmail.org/
[hidden email]
https://lists.sourceforge.net/lists/listinfo/saxon-help 
Reply | Threaded
Open this post in threaded view
|

Re: Saxon XSLT and XQuery Processor - saxon -- ECCN Request

Michael Kay

> On 3 Jun 2015, at 08:36, Joice Joy <[hidden email]> wrote:
>
> Could you also share the country of origin of the code.
>
> Thanks and Regards,
> Joice Joy
>


Sorry, I’m not sure what that means. Some of it was written on a Eurostar train travelling between London and Brussels. In the case of contributed open source code, in many cases I have no idea: we record who the contributor was, but not where they were located at the time.

Michael Kay
Saxonica


------------------------------------------------------------------------------
_______________________________________________
saxon-help mailing list archived at http://saxon.markmail.org/
[hidden email]
https://lists.sourceforge.net/lists/listinfo/saxon-help 
Reply | Threaded
Open this post in threaded view
|

Re: Saxon XSLT and XQuery Processor - saxon -- ECCN Request

Joice Joy
I am also not an expert on this.

I found this:
http://www.governmentcontractslawblog.com/2013/02/articles/software/country-of-origin-for-computer-software-u-s-customs-finally-sheds-some-light-on-the-issue/

I believe it means the country where the code was assembled (compiled)
into final product (object code, binary and library)

Does this help in getting an answer.

Thanks and Regards,
Joice Joy


On Wed, Jun 3, 2015 at 1:40 PM, Michael Kay <[hidden email]> wrote:

>
>> On 3 Jun 2015, at 08:36, Joice Joy <[hidden email]> wrote:
>>
>> Could you also share the country of origin of the code.
>>
>> Thanks and Regards,
>> Joice Joy
>>
>
>
> Sorry, I’m not sure what that means. Some of it was written on a Eurostar train travelling between London and Brussels. In the case of contributed open source code, in many cases I have no idea: we record who the contributor was, but not where they were located at the time.
>
> Michael Kay
> Saxonica
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> saxon-help mailing list archived at http://saxon.markmail.org/
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/saxon-help

------------------------------------------------------------------------------
_______________________________________________
saxon-help mailing list archived at http://saxon.markmail.org/
[hidden email]
https://lists.sourceforge.net/lists/listinfo/saxon-help 
Reply | Threaded
Open this post in threaded view
|

Re: Saxon XSLT and XQuery Processor - saxon -- ECCN Request

Michael Kay

> On 3 Jun 2015, at 09:32, Joice Joy <[hidden email]> wrote:
>
> I am also not an expert on this.
>
> I found this:
> http://www.governmentcontractslawblog.com/2013/02/articles/software/country-of-origin-for-computer-software-u-s-customs-finally-sheds-some-light-on-the-issue/
>
> I believe it means the country where the code was assembled (compiled)
> into final product (object code, binary and library)
>
> Does this help in getting an answer.
>

Yes, that’s pretty straightforward then, it’s the UK.

Provided of course that it means the location of the people doing the work, not the location of the computers they were using…

Michael Kay
Saxonica


------------------------------------------------------------------------------
_______________________________________________
saxon-help mailing list archived at http://saxon.markmail.org/
[hidden email]
https://lists.sourceforge.net/lists/listinfo/saxon-help 
Reply | Threaded
Open this post in threaded view
|

Re: Saxon XSLT and XQuery Processor - saxon -- ECCN Request

Joice Joy
I hope thats outside US :)

Thanks a lot.

On Wed, Jun 3, 2015 at 2:38 PM, Michael Kay <[hidden email]> wrote:

>
>> On 3 Jun 2015, at 09:32, Joice Joy <[hidden email]> wrote:
>>
>> I am also not an expert on this.
>>
>> I found this:
>> http://www.governmentcontractslawblog.com/2013/02/articles/software/country-of-origin-for-computer-software-u-s-customs-finally-sheds-some-light-on-the-issue/
>>
>> I believe it means the country where the code was assembled (compiled)
>> into final product (object code, binary and library)
>>
>> Does this help in getting an answer.
>>
>
> Yes, that’s pretty straightforward then, it’s the UK.
>
> Provided of course that it means the location of the people doing the work, not the location of the computers they were using…
>
> Michael Kay
> Saxonica
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> saxon-help mailing list archived at http://saxon.markmail.org/
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/saxon-help

------------------------------------------------------------------------------
_______________________________________________
saxon-help mailing list archived at http://saxon.markmail.org/
[hidden email]
https://lists.sourceforge.net/lists/listinfo/saxon-help